Riot shield

If out of stock, shields are available for pre-order and delivery within 4 months.

Made in Europe of Lexan™ polycarbonate, developed and tested with and for operators, the Pangolin riot shield stands out for its mechanical performance and adaptability.

CHARACTERISTICS:

• Average weight : 4 kg

• Shape: rectangular with rounded corners

• Curve radius: 895 mm

• Dimension: length: 1000 mm; width: 650 mm (Dimensions and equipment adaptable on request)

• Thickness: 80 mm (mattress + shell curve + handle)

• Composition of the shell in Lexan™ 9030 & 9030 TG

• Transmittance: 86%

DESCRIPTION:

• EN 166 & EN170 certification for ballistic shields (mechanical resistance and optical quality)

• Protective joint: glued, tear-resistant.

• Internal hook-and-loop marker placement up to 350x100 mm

• Fixing for Baton or Tonfa

• Ultra-light, impact-resistant polymer handle with excellent freedom of movement

• Central foam strip for shock absorption and enhanced comfort

• Ambidextrous

• Accessories on request: Nylon carrying and transport bag

• Warranty: 5 years

RESISTANCE:

• Hull strength: 900 joules

• Stone throwing / Steel balls / Bolts / Paving stones / Iron bars / Distress flares / Acid / Molotov cocktail

• Temperature test: product performance is unaffected in circumstances between -20°C and +55°C

USE:

WARNING: Shields do not offer unlimited protection. For your own protection, read these instructions completely before using them.

Shields are designed to be attached to the non-dominant arm and held at a slight inward angle to deflect thrown objects towards the ground. The ergonomic design of the handle allows the user to use both hands under extreme impact conditions and is dielectric, preventing the passage of electricity.

Storage instructions

Shields should be stored at room temperature - inside the packaging. Cardboard boxes can be stored on top of each other.

Cleaning and disinfection

After use, shields must be cleaned, disinfected and inspected. They should be cleaned using ONLY water and mild soap, then dried. After cleaning and drying, the user can inspect the shield for damage and replace any damaged components.

Areas of use

Shields are designed to protect the user, although they can be used offensively in the event of direct contact. They also protect against impacts, splashes and fragments.

Spare parts and accessories

The handling parts (handle and strap) are reversible and easy to change so they can be used by both right- and left-handers. They can also be replaced should these show signs of wear.

Duration of use

The estimated month and year of shield obsolescence is five (5) years in the event of exposure to significant risks.

WARNING:

• Using any other lubricant containing chemicals to clean the screen may result in permanent visual impairment or other serious injury.

• Never use for cleaning: alkaline cleaners - gasoline - lacquers - thinners - acetone - acetone-type solvents or any other chemical cleaning product.

• Never use thread-locking products on screws.

• In the event of damage to the shields, there is a 5-year warranty for after-sales services - availability of all shield replacement parts.

• This product is intended to protect the body against moderate impact risks, but it is not unbreakable.

• Pitted or scratched shields reduce vision and protection and must be replaced.

• Materials likely to come into contact with the wearer's skin may cause allergic reactions in sensitive people allergic reactions in sensitive people.

ATTENTION FOR YOUR INFORMATION:

In case of stock shortage, shields are available for pre-order and deliverable within 4 months.